✨ New Arrivals Just Dropped!Explore
HomeStore
NXP MC9S08AW32CFUE 8 Bit Microcontroller, General Purpose AW Series, S08AW, 40 MHz, 32 KB, 2 KB, 64 Pins, QFP
NXP MC9S08AW32CFUE 8 Bit Microcontroller, General Purpose AW Series, S08AW, 40 MHz, 32 KB, 2 KB, 64 Pins, QFP
The MC9S08AW32CFUE is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 32kB internal flash, 2kB internal RAM, 16-channel 10-bit A/D converter and 54 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, one serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). On-chip real-time in-circuit emulation (ICE) with two comparators (plus one in BDM), nine trigger modes and on-chip bus capture buffer.
- HC08 Instruction set with added BGND instruction
- Single-wire background debug mode interface
- On-chip real-time in-circuit emulation (ICE)
- Support for up to 32 Interrupt/reset sources
- Clock source options include crystal, resonator, external clock or internally generated clock
- Optional computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- Wait plus two stops
- One 2-channel and one 6-channel 16-bit Timer/pulse-width modulator (TPM) module
- 8-pin Keyboard interrupt module (KBI)
- Software-selectable pull-ups on ports when used as inputs
- Software-selectable slew rate control on ports when used as outputs
- Software-selectable drive strength on ports when used as outputs
- Master reset pin and power-on reset (POR)
- Internal pull-up on RESET, IRQ and BKGD/MS pins
Applications
Industrial
Product details
| Controller Family/Series | S08AW |
| Embedded Interface Type | I2C, SCI, SPI |
| No. of I/O's | 54I/O's |
| Program Memory Size | 32KB |
| No. of Pins | 64Pins |
| Product Range | S08 Microcontrollers |
| Automotive Qualification Standard | - |
| CPU Speed | 40MHz |
| Supply Voltage Min | 2.7V |
| MCU Case Style | QFP |
| Packaging | Each |
| Supply Voltage Max | 5.5V |
| RAM Memory Size | 2KB |
| MSL | MSL 3 - 168 hours |
Other details
| Brand | NXP |
| Part Number | MC9S08AW32CFUE |
| Quantity | Each |
| Technical Data Sheet EN |  |
| Product Change Notice EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$5.42
Original: $18.05
-70%NXP MC9S08AW32CFUE 8 Bit Microcontroller, General Purpose AW Series, S08AW, 40 MHz, 32 KB, 2 KB, 64 Pins, QFP—
$18.05
$5.42NXP MC9S08AW32CFUE 8 Bit Microcontroller, General Purpose AW Series, S08AW, 40 MHz, 32 KB, 2 KB, 64 Pins, QFP
The MC9S08AW32CFUE is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 32kB internal flash, 2kB internal RAM, 16-channel 10-bit A/D converter and 54 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, one serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). On-chip real-time in-circuit emulation (ICE) with two comparators (plus one in BDM), nine trigger modes and on-chip bus capture buffer.
- HC08 Instruction set with added BGND instruction
- Single-wire background debug mode interface
- On-chip real-time in-circuit emulation (ICE)
- Support for up to 32 Interrupt/reset sources
- Clock source options include crystal, resonator, external clock or internally generated clock
- Optional computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- Wait plus two stops
- One 2-channel and one 6-channel 16-bit Timer/pulse-width modulator (TPM) module
- 8-pin Keyboard interrupt module (KBI)
- Software-selectable pull-ups on ports when used as inputs
- Software-selectable slew rate control on ports when used as outputs
- Software-selectable drive strength on ports when used as outputs
- Master reset pin and power-on reset (POR)
- Internal pull-up on RESET, IRQ and BKGD/MS pins
Applications
Industrial
Product details
| Controller Family/Series | S08AW |
| Embedded Interface Type | I2C, SCI, SPI |
| No. of I/O's | 54I/O's |
| Program Memory Size | 32KB |
| No. of Pins | 64Pins |
| Product Range | S08 Microcontrollers |
| Automotive Qualification Standard | - |
| CPU Speed | 40MHz |
| Supply Voltage Min | 2.7V |
| MCU Case Style | QFP |
| Packaging | Each |
| Supply Voltage Max | 5.5V |
| RAM Memory Size | 2KB |
| MSL | MSL 3 - 168 hours |
Other details
| Brand | NXP |
| Part Number | MC9S08AW32CFUE |
| Quantity | Each |
| Technical Data Sheet EN | |
| Product Change Notice EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The MC9S08AW32CFUE is a 8-bit General-purpose Microcontroller based on enhanced HCS08 CPU (20MHz bus) with CISC architecture operates at a maximum frequency of 40MHz. The device incorporates 32kB internal flash, 2kB internal RAM, 16-channel 10-bit A/D converter and 54 general-purpose I/O pins. This device also features peripherals like one inter-integrated circuit (IIC) bus module to operate at up to 100kbps, one serial peripheral interface modules (SPI), two serial communications interface (SCI) modules and real-time counter (RTC). Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module). On-chip real-time in-circuit emulation (ICE) with two comparators (plus one in BDM), nine trigger modes and on-chip bus capture buffer.
- HC08 Instruction set with added BGND instruction
- Single-wire background debug mode interface
- On-chip real-time in-circuit emulation (ICE)
- Support for up to 32 Interrupt/reset sources
- Clock source options include crystal, resonator, external clock or internally generated clock
- Optional computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- Wait plus two stops
- One 2-channel and one 6-channel 16-bit Timer/pulse-width modulator (TPM) module
- 8-pin Keyboard interrupt module (KBI)
- Software-selectable pull-ups on ports when used as inputs
- Software-selectable slew rate control on ports when used as outputs
- Software-selectable drive strength on ports when used as outputs
- Master reset pin and power-on reset (POR)
- Internal pull-up on RESET, IRQ and BKGD/MS pins
Applications
Industrial
Product details
| Controller Family/Series | S08AW |
| Embedded Interface Type | I2C, SCI, SPI |
| No. of I/O's | 54I/O's |
| Program Memory Size | 32KB |
| No. of Pins | 64Pins |
| Product Range | S08 Microcontrollers |
| Automotive Qualification Standard | - |
| CPU Speed | 40MHz |
| Supply Voltage Min | 2.7V |
| MCU Case Style | QFP |
| Packaging | Each |
| Supply Voltage Max | 5.5V |
| RAM Memory Size | 2KB |
| MSL | MSL 3 - 168 hours |
Other details
| Brand | NXP |
| Part Number | MC9S08AW32CFUE |
| Quantity | Each |
| Technical Data Sheet EN | |
| Product Change Notice EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
