✨ New Arrivals Just Dropped!Explore
HomeStore
Texas Instruments TXS0108EPWR TXS0108EPWR Voltage Level Translator Bidirectional 8 Input 620 µA 4.8 ns 1.2 V to 5.5 TSSOP-20
Texas Instruments TXS0108EPWR TXS0108EPWR Voltage Level Translator Bidirectional 8 Input 620 µA 4.8 ns 1.2 V to 5.5 TSSOP-20
The TXS0108EPWR is a 8-bit Non-inverting Translator IC, uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- No Direction-control Signal Needed
- 60Mbps (Push Pull) and 2Mbps (Open Drain) Maximum Data Rates
- 1.2 to 3.6V on A Port and 1.65 to 5.5V on B Port (VCCA<=VCCB)
- No Power-supply Sequencing Required - Either VCCA or VCCB can be Ramped First
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Audio, Consumer Electronics, Computers & Computer Peripherals
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | TXS0108EPWR |
| Quantity | Each (Supplied on Cut Tape) |
| Product Change Notice EN |  |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
$1.29
Original: $4.31
-70%Texas Instruments TXS0108EPWR TXS0108EPWR Voltage Level Translator Bidirectional 8 Input 620 µA 4.8 ns 1.2 V to 5.5 TSSOP-20—
$4.31
$1.29Texas Instruments TXS0108EPWR TXS0108EPWR Voltage Level Translator Bidirectional 8 Input 620 µA 4.8 ns 1.2 V to 5.5 TSSOP-20
The TXS0108EPWR is a 8-bit Non-inverting Translator IC, uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- No Direction-control Signal Needed
- 60Mbps (Push Pull) and 2Mbps (Open Drain) Maximum Data Rates
- 1.2 to 3.6V on A Port and 1.65 to 5.5V on B Port (VCCA<=VCCB)
- No Power-supply Sequencing Required - Either VCCA or VCCB can be Ramped First
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Audio, Consumer Electronics, Computers & Computer Peripherals
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | TXS0108EPWR |
| Quantity | Each (Supplied on Cut Tape) |
| Product Change Notice EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The TXS0108EPWR is a 8-bit Non-inverting Translator IC, uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- No Direction-control Signal Needed
- 60Mbps (Push Pull) and 2Mbps (Open Drain) Maximum Data Rates
- 1.2 to 3.6V on A Port and 1.65 to 5.5V on B Port (VCCA<=VCCB)
- No Power-supply Sequencing Required - Either VCCA or VCCB can be Ramped First
- Latch-up Performance Exceeds 100mA Per JESD 78, Class II
- Green Product, No Sb/Br
Audio, Consumer Electronics, Computers & Computer Peripherals
Warnings Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.Other details
| Brand | TEXAS INSTRUMENTS |
| Part Number | TXS0108EPWR |
| Quantity | Each (Supplied on Cut Tape) |
| Product Change Notice EN | |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
