✨ New Arrivals Just Dropped!Explore
HomeStore

TK Audio Transceiver 2 Four-Channel Universal Insert Station

TK Audio Transceiver 2 Four-Channel Universal Insert Station

TK Audio Transceiver 2 Overview

Ensure a perfect match between all your audio gear with the Transceiver 2 Universal Insert Station from TK Audio, a four-channel processor designed to convert balanced signals to unbalanced and back again without loss of signal quality as well as versatile impedance matching, level matching, DI functions, and reamping. Each channel sports blend control for adjusting the amount of insert FX level, a polarity switch, a send level control, and a return level control with up to +20 dB of clean make up gain, with each knob being stepped for easy recall.

You can use the high-impedance inputs for turning your Transceiver 2 into a four-channel DI box, capable of driving a 600-ohm transformer-balanced preamp input, or as a convenient reamping tool with a Y-splitter cable. You can also use it to balance levels and impedance on stage when incorporating a wide range of modern and vintage gear.

Clean Sound for All Your Gear
The Transceiver 2 is a transformerless, balanced design for the best possible signal handling. The unit possesses a flat frequency response, low harmonic distortion, and low noise. You will maintain perfect signal integrity when converting from balanced to unbalanced and back, and both the balanced output and unbalanced send have a high driving capability to properly drive input transformers.
Reamping
One of the most interesting uses of the Transceiver 2 is for reamping. Simply hook up your guitar and amp with a Y splitter connected to the Transceiver 2 return. Adjust the amp for your wanted sound and use the Transceiver 2 gain control to adjust the level of the direct guitar signal.

The guitar signal can also be fed through your DAW and then back to the amp. Lower the send level control and move the cable that feeds the amp to the send output instead, then adjust the send control, so you get the same amp level as you got when the amp was connected to the Y splitter. By connecting the amp this way, you can recreate the sound from this setup with 100% accuracy by feeding the recorded direct signal to the amp again (as long as the amp is the same and controls are adjusted the same).

Connections
The Transceiver 2 utilizes 3-pin XLR connectors for the balanced connections in the rear. It uses 1/4" TRS connections in the front for the unbalanced Send and Return jacks.

Items Included

  • TK Audio Transceiver 2 Four-Channel Universal Insert Station
  • Limited 2-Year Manufacturer Warranty

Additional Resources

    TK Audio Transceiver 2 Specs

    General
    Frequency Response
    20 Hz to 80 kHz
    Maximum Input Level
    Balanced: +27 dBu
    Unbalanced: +21 dBu
    Maximum Output Level
    Balanced: +27 dBu
    Unbalanced: +21 dBu
    Input Impedance
    Balanced: 24 Kilohms
    Unbalanced: 1 Megohm
    Output Impedance
    50 Ohm
    THD + N
    <0.0004%
    SNR
    100 dB
    Inputs/Outputs
    Audio I/O
    4x XLR 3-Pin Line Input
    4x XLR 3-Pin Line Output
    4x 1/4" TRS Hi-Z/Instrument Input (Return)
    4x 1/4" TRS Hi-Z/Instrument Output (Send)
    Power
    Power Source
    AC Input
    Power Consumption
    12 VA
    AC Power
    115 / 230 VAC, 50/60 Hz (User Selected)
    Physical
    Mounting
    Front: 4x Standard Rackmount Hole
    Color
    Black
    Material of Construction
    Metal
    Dimensions
    19" / 48.3 cm (1 RU)

    All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
    $1,773.70
    TK Audio Transceiver 2 Four-Channel Universal Insert Station—
    $1,773.70

    TK Audio Transceiver 2 Four-Channel Universal Insert Station

    TK Audio Transceiver 2 Overview

    Ensure a perfect match between all your audio gear with the Transceiver 2 Universal Insert Station from TK Audio, a four-channel processor designed to convert balanced signals to unbalanced and back again without loss of signal quality as well as versatile impedance matching, level matching, DI functions, and reamping. Each channel sports blend control for adjusting the amount of insert FX level, a polarity switch, a send level control, and a return level control with up to +20 dB of clean make up gain, with each knob being stepped for easy recall.

    You can use the high-impedance inputs for turning your Transceiver 2 into a four-channel DI box, capable of driving a 600-ohm transformer-balanced preamp input, or as a convenient reamping tool with a Y-splitter cable. You can also use it to balance levels and impedance on stage when incorporating a wide range of modern and vintage gear.

    Clean Sound for All Your Gear
    The Transceiver 2 is a transformerless, balanced design for the best possible signal handling. The unit possesses a flat frequency response, low harmonic distortion, and low noise. You will maintain perfect signal integrity when converting from balanced to unbalanced and back, and both the balanced output and unbalanced send have a high driving capability to properly drive input transformers.
    Reamping
    One of the most interesting uses of the Transceiver 2 is for reamping. Simply hook up your guitar and amp with a Y splitter connected to the Transceiver 2 return. Adjust the amp for your wanted sound and use the Transceiver 2 gain control to adjust the level of the direct guitar signal.

    The guitar signal can also be fed through your DAW and then back to the amp. Lower the send level control and move the cable that feeds the amp to the send output instead, then adjust the send control, so you get the same amp level as you got when the amp was connected to the Y splitter. By connecting the amp this way, you can recreate the sound from this setup with 100% accuracy by feeding the recorded direct signal to the amp again (as long as the amp is the same and controls are adjusted the same).

    Connections
    The Transceiver 2 utilizes 3-pin XLR connectors for the balanced connections in the rear. It uses 1/4" TRS connections in the front for the unbalanced Send and Return jacks.

    Items Included

    • TK Audio Transceiver 2 Four-Channel Universal Insert Station
    • Limited 2-Year Manufacturer Warranty

    Additional Resources

      TK Audio Transceiver 2 Specs

      General
      Frequency Response
      20 Hz to 80 kHz
      Maximum Input Level
      Balanced: +27 dBu
      Unbalanced: +21 dBu
      Maximum Output Level
      Balanced: +27 dBu
      Unbalanced: +21 dBu
      Input Impedance
      Balanced: 24 Kilohms
      Unbalanced: 1 Megohm
      Output Impedance
      50 Ohm
      THD + N
      <0.0004%
      SNR
      100 dB
      Inputs/Outputs
      Audio I/O
      4x XLR 3-Pin Line Input
      4x XLR 3-Pin Line Output
      4x 1/4" TRS Hi-Z/Instrument Input (Return)
      4x 1/4" TRS Hi-Z/Instrument Output (Send)
      Power
      Power Source
      AC Input
      Power Consumption
      12 VA
      AC Power
      115 / 230 VAC, 50/60 Hz (User Selected)
      Physical
      Mounting
      Front: 4x Standard Rackmount Hole
      Color
      Black
      Material of Construction
      Metal
      Dimensions
      19" / 48.3 cm (1 RU)

      All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

      Product Information

      Shipping & Returns

      Description

      TK Audio Transceiver 2 Overview

      Ensure a perfect match between all your audio gear with the Transceiver 2 Universal Insert Station from TK Audio, a four-channel processor designed to convert balanced signals to unbalanced and back again without loss of signal quality as well as versatile impedance matching, level matching, DI functions, and reamping. Each channel sports blend control for adjusting the amount of insert FX level, a polarity switch, a send level control, and a return level control with up to +20 dB of clean make up gain, with each knob being stepped for easy recall.

      You can use the high-impedance inputs for turning your Transceiver 2 into a four-channel DI box, capable of driving a 600-ohm transformer-balanced preamp input, or as a convenient reamping tool with a Y-splitter cable. You can also use it to balance levels and impedance on stage when incorporating a wide range of modern and vintage gear.

      Clean Sound for All Your Gear
      The Transceiver 2 is a transformerless, balanced design for the best possible signal handling. The unit possesses a flat frequency response, low harmonic distortion, and low noise. You will maintain perfect signal integrity when converting from balanced to unbalanced and back, and both the balanced output and unbalanced send have a high driving capability to properly drive input transformers.
      Reamping
      One of the most interesting uses of the Transceiver 2 is for reamping. Simply hook up your guitar and amp with a Y splitter connected to the Transceiver 2 return. Adjust the amp for your wanted sound and use the Transceiver 2 gain control to adjust the level of the direct guitar signal.

      The guitar signal can also be fed through your DAW and then back to the amp. Lower the send level control and move the cable that feeds the amp to the send output instead, then adjust the send control, so you get the same amp level as you got when the amp was connected to the Y splitter. By connecting the amp this way, you can recreate the sound from this setup with 100% accuracy by feeding the recorded direct signal to the amp again (as long as the amp is the same and controls are adjusted the same).

      Connections
      The Transceiver 2 utilizes 3-pin XLR connectors for the balanced connections in the rear. It uses 1/4" TRS connections in the front for the unbalanced Send and Return jacks.

      Items Included

      • TK Audio Transceiver 2 Four-Channel Universal Insert Station
      • Limited 2-Year Manufacturer Warranty

      Additional Resources

        TK Audio Transceiver 2 Specs

        General
        Frequency Response
        20 Hz to 80 kHz
        Maximum Input Level
        Balanced: +27 dBu
        Unbalanced: +21 dBu
        Maximum Output Level
        Balanced: +27 dBu
        Unbalanced: +21 dBu
        Input Impedance
        Balanced: 24 Kilohms
        Unbalanced: 1 Megohm
        Output Impedance
        50 Ohm
        THD + N
        <0.0004%
        SNR
        100 dB
        Inputs/Outputs
        Audio I/O
        4x XLR 3-Pin Line Input
        4x XLR 3-Pin Line Output
        4x 1/4" TRS Hi-Z/Instrument Input (Return)
        4x 1/4" TRS Hi-Z/Instrument Output (Send)
        Power
        Power Source
        AC Input
        Power Consumption
        12 VA
        AC Power
        115 / 230 VAC, 50/60 Hz (User Selected)
        Physical
        Mounting
        Front: 4x Standard Rackmount Hole
        Color
        Black
        Material of Construction
        Metal
        Dimensions
        19" / 48.3 cm (1 RU)

        All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
        TK Audio Transceiver 2 Four-Channel Universal Insert Station | Tanotis