✨ New Arrivals Just Dropped!Explore
WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD (4-Pack)
WD Plus Internal HDD Overview
This Kit bundles four 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD, for an overall storage capacity of 8TB. WD Red Plus drives are built to handle the workloads of RAID-optimized NAS systems with up to eight drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems.
Highlights
- 2TB storage capacity
- For RAID-optimized NAS systems with up to 8 bays
- Workload rating of up 180TB per year and 1 million hours MTBF
Ideal For
- Home offices and power users
- Small to medium businesses
- Commercial and consumer NAS systems
Tuned for NAS with NASware
Western Digital's exclusive NASware technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.
Designed for Continuous Operation
Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.
Tested for Dependable Compatibility
Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Lower TCO
WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.
Powered for Strong Performance
Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.
Balanced for Increased Reliability
Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. WD's enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.
Limited 3-Year Warranty
Western Digital stands behind their NAS storage solutions with the assurance of a limited 3-year limited warranty and world-class support services for hassle-free data storage.
Desktop Drives vs. WD Red Pro
Compatibility
Unlike desktop drives, WD Red hard drives are specifically designed and tested for NAS and include NASware technology which fine tunes drive parameters to match NAS system workloads for optimum performance.
Reliability
Desktop drives aren't typically designed for the demands of an always-on NAS environment. WD Red hard drives are designed to perform under tough conditions encountered in high-intensity 24/7 multi-user NAS environments.
RAID Ready
WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.
Noise and Vibration Protection
Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.
UPC: 718037899770
Items Included
- 4 x WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD
- Limited 3-Year Manufacturer Warranty
Additional Resources
WD Plus Internal HDD Specs
Key Specs
| Total Installed Storage |
2 TB
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Encryption Support |
No
|
| Mean Time Between Failures (MTBF) |
1.0 Million Hours
|
| Endurance (Total Bytes Written) |
180 TB
|
Electrical
| Power Draw |
4.0 W (Active)
2.4 W (Idle) 0.3 W (Standby) |
| Input Power |
12 VDC at 1.2 A
|
General
| Operating Conditions |
32 to 149?F / 0 to 65?C
|
| Operating Shock |
70 G / 2.0 ms
|
| Storage Conditions |
-40 to 158?F / -40 to 70?C
|
| Dimensions |
5.8 x 4 x 1" / 147 x 101.6 x 26.1 mm
|
| Weight |
0.99 lb / 0.45 kg
|
Packaging Info
| Package Weight |
1.235 lb
|
| Box Dimensions (LxWxH) |
7.6 x 5.7 x 2.5"
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
$180.47
Original: $601.58
-70%WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD (4-Pack)—
$601.58
$180.47More Images
WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD (4-Pack)
WD Plus Internal HDD Overview
This Kit bundles four 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD, for an overall storage capacity of 8TB. WD Red Plus drives are built to handle the workloads of RAID-optimized NAS systems with up to eight drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems.
Highlights
- 2TB storage capacity
- For RAID-optimized NAS systems with up to 8 bays
- Workload rating of up 180TB per year and 1 million hours MTBF
Ideal For
- Home offices and power users
- Small to medium businesses
- Commercial and consumer NAS systems
Tuned for NAS with NASware
Western Digital's exclusive NASware technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.
Designed for Continuous Operation
Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.
Tested for Dependable Compatibility
Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Lower TCO
WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.
Powered for Strong Performance
Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.
Balanced for Increased Reliability
Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. WD's enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.
Limited 3-Year Warranty
Western Digital stands behind their NAS storage solutions with the assurance of a limited 3-year limited warranty and world-class support services for hassle-free data storage.
Desktop Drives vs. WD Red Pro
Compatibility
Unlike desktop drives, WD Red hard drives are specifically designed and tested for NAS and include NASware technology which fine tunes drive parameters to match NAS system workloads for optimum performance.
Reliability
Desktop drives aren't typically designed for the demands of an always-on NAS environment. WD Red hard drives are designed to perform under tough conditions encountered in high-intensity 24/7 multi-user NAS environments.
RAID Ready
WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.
Noise and Vibration Protection
Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.
UPC: 718037899770
Items Included
- 4 x WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD
- Limited 3-Year Manufacturer Warranty
Additional Resources
WD Plus Internal HDD Specs
Key Specs
| Total Installed Storage |
2 TB
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Encryption Support |
No
|
| Mean Time Between Failures (MTBF) |
1.0 Million Hours
|
| Endurance (Total Bytes Written) |
180 TB
|
Electrical
| Power Draw |
4.0 W (Active)
2.4 W (Idle) 0.3 W (Standby) |
| Input Power |
12 VDC at 1.2 A
|
General
| Operating Conditions |
32 to 149?F / 0 to 65?C
|
| Operating Shock |
70 G / 2.0 ms
|
| Storage Conditions |
-40 to 158?F / -40 to 70?C
|
| Dimensions |
5.8 x 4 x 1" / 147 x 101.6 x 26.1 mm
|
| Weight |
0.99 lb / 0.45 kg
|
Packaging Info
| Package Weight |
1.235 lb
|
| Box Dimensions (LxWxH) |
7.6 x 5.7 x 2.5"
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
WD Plus Internal HDD Overview
This Kit bundles four 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD, for an overall storage capacity of 8TB. WD Red Plus drives are built to handle the workloads of RAID-optimized NAS systems with up to eight drive bays, including home offices and power users, small to medium businesses, and consumer and commercial NAS systems.
Highlights
- 2TB storage capacity
- For RAID-optimized NAS systems with up to 8 bays
- Workload rating of up 180TB per year and 1 million hours MTBF
Ideal For
- Home offices and power users
- Small to medium businesses
- Commercial and consumer NAS systems
Tuned for NAS with NASware
Western Digital's exclusive NASware technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability.
Designed for Continuous Operation
Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24/7, giving users the confidence of knowing they can reliably access their data.
Tested for Dependable Compatibility
Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.
Optimized for Lower TCO
WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.
Powered for Strong Performance
Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.
Balanced for Increased Reliability
Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. WD's enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.
Limited 3-Year Warranty
Western Digital stands behind their NAS storage solutions with the assurance of a limited 3-year limited warranty and world-class support services for hassle-free data storage.
Desktop Drives vs. WD Red Pro
Compatibility
Unlike desktop drives, WD Red hard drives are specifically designed and tested for NAS and include NASware technology which fine tunes drive parameters to match NAS system workloads for optimum performance.
Reliability
Desktop drives aren't typically designed for the demands of an always-on NAS environment. WD Red hard drives are designed to perform under tough conditions encountered in high-intensity 24/7 multi-user NAS environments.
RAID Ready
WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.
Noise and Vibration Protection
Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.
UPC: 718037899770
Items Included
- 4 x WD 2TB Red Plus 5400 rpm SATA III 3.5" Internal NAS HDD
- Limited 3-Year Manufacturer Warranty
Additional Resources
WD Plus Internal HDD Specs
Key Specs
| Total Installed Storage |
2 TB
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Drive Type |
SATA III / 3.5" HDD (5400 rpm)
|
| Read Speed |
Maximum: 180 MB/s
|
| Write Speed |
Maximum: 180 MB/s
|
| Encryption Support |
No
|
| Mean Time Between Failures (MTBF) |
1.0 Million Hours
|
| Endurance (Total Bytes Written) |
180 TB
|
Electrical
| Power Draw |
4.0 W (Active)
2.4 W (Idle) 0.3 W (Standby) |
| Input Power |
12 VDC at 1.2 A
|
General
| Operating Conditions |
32 to 149?F / 0 to 65?C
|
| Operating Shock |
70 G / 2.0 ms
|
| Storage Conditions |
-40 to 158?F / -40 to 70?C
|
| Dimensions |
5.8 x 4 x 1" / 147 x 101.6 x 26.1 mm
|
| Weight |
0.99 lb / 0.45 kg
|
Packaging Info
| Package Weight |
1.235 lb
|
| Box Dimensions (LxWxH) |
7.6 x 5.7 x 2.5"
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
